Mirra BuildTech Solutions

Birla Aerocon Wall Panels in Coimbatore

Looking for AAC panels or a dry-wall alternative to brick? Aerocon panels are a factory-made sandwich panel: two fibre-cement sheets around a lightweight concrete core.

For new construction and renovation.

Get a Project Quotation

Tell us about your project and our team will contact you with a recommendation and quotation.

Step 1 of 2

Aerocon panels are a factory-made sandwich panel: two fibre-cement sheets around a lightweight concrete core.

For new construction and renovation.

Mirra BuildTech Solutions, 41A, Mamarathottam, Ganapathy, Coimbatore

Room walled with grey Aerocon panels, with white treated joints and door and window openings
Aerocon panels with joints treated, before final finish

Clients Mirra has worked with

  • Ramco
  • AMC Multi Speciality Hospital
  • The Institute of Chartered Accountants of India
  • PSG College of Arts and Science
  • CODISSIA Intec Technology Centre
  • Srinivasa Poultry Farm
  • SNR Sons Trust
  • Dr. Muthu's
  • P&C Projects
  • Sri Ranganathar Industries
  • Rathinam
  • Sobha
  • Cowmalaya
  • Sumeru by Tenaspace
  • Smard
  • Dominion Genesis
  • Sri Thulasi Chits & Finance
  • JJ Coatings

Why choose panels over a brick partition?

A brick wall is built one unit at a time, on site, with wet materials at every stage. That is where the weight, the waiting and the mess come from.

Two-storey building walled with large grey panels and treated joints
Panels
Brick walls being built course by course on a building site, with a worker behind them
Brick
Aerocon panels compared with a brick partition
PanelsBrick
MethodFactory-made panels, fixed panel by panelIndividual bricks laid in mortar
SpeedGenerally faster in suitable projectsGenerally slower
WeightLightweight compared with brick masonryGenerally heavier
Site workChannel fixing, panel fixing, joint treatmentMasonry, jointing and plaster
ElectricalConcealed routes planned and cut into the panelConventional chasing
PlumbingConcealed routes planned and cut into the panel; larger pipes may need a ductConventional chasing

Actual performance depends on the specific products and the complete wall assembly.

Factory partition going up, with stacks of panels on the floor and workers fixing panels behind
Panels stacked on site, ready to fix
Panel wall with window openings and white treated joints
Joints treated around the openings

Why choose Aerocon Wall Panels?

Lightweight wall system.

Reduces the weight of partition walls compared with many traditional masonry systems.

Faster installation.

Factory-made panels simplify the work and speed up installation in suitable projects.

Neat wall finish.

Treated joints and finished panel surfaces give a suitable base for final decoration.

Flexible space planning.

Suits many interior partition needs, from a new home to a renovated office.

What panels still need: joint treatment, surface preparation and the required final finish.

Where Aerocon panels are used

How panel installation works

  1. Bare steel frame on the upper floors of a building

    Steel frame goes up

  2. House walled with grey panels, with white putty along the joints

    Panels fixed, joints filled

  3. The same house fully finished and painted

    Painted and finished

Single-storey structure built with Aerocon panels, with joints treated and walls awaiting final finish
Aerocon panel structure on site

Panels on site

Fibre-cement facing sheetTongue and groove jointLightweight concrete coreFibre-cement facing sheet
Panel cross-section, seen from above. Diagram, not to scale.

Questions customers ask about Aerocon panels

Don't see your question? Ask us on WhatsApp or call 94426 52355.

Are Aerocon Panels lightweight?

Yes. They are designed as a lightweight walling solution compared with conventional brick masonry walls, which can help reduce the wall load on the building structure.

Are Aerocon Panels strong?

Yes. They are engineered building panels for specified wall and partition applications. Performance depends on panel thickness, fixing method, supporting structure, joint treatment and installation quality.

How many years will Aerocon Panels last?

They are intended for long-term building applications. Service life depends on correct installation, joint treatment, moisture protection, maintenance and usage conditions.

Can Aerocon Panels be installed on the ground floor?

Yes, where suitable floor support, anchoring and structural conditions are provided.

Can Aerocon Panels be installed on the first floor and upper floors?

Yes. The supporting slab, floor and ceiling connections must be checked before installation.

Are Aerocon Panels suitable for bathrooms?

They can be considered for suitable bathroom partitions, provided the joints, plumbing, waterproofing and final surface treatment are properly designed.

Can electrical wiring be installed inside Aerocon Panels?

Yes. Concealed routes are made by cutting the facing sheet with proper tools, not by uncontrolled hammering, and conduits and switch boxes are fitted along them. Surface-mounted wiring is also possible, and multiple conduits may need a double-skin wall.

Can plumbing pipes be installed inside Aerocon Panels?

Yes, suitable plumbing arrangements can be planned. Pipe size, panel thickness, chase depth and service access must be considered before installation. Larger pipes may need an alternative route or a service duct.

Can we install wiring on the outside surface?

Yes. Surface-mounted electrical conduits can be used. The electrical contractor can choose concealed or surface-mounted wiring based on the interior design and project requirements.

Can we fix doors and windows in Aerocon Panels?

Yes. Suitable door and window frames can be accommodated with the recommended fixing arrangements and appropriate supports.

Can we hang TV units, cupboards and shelves on Aerocon Panels?

Yes, provided the correct fasteners and fixing methods are selected for the load. Heavy fixtures need suitable engineered anchoring, and ordinary nails are not a substitute for the recommended fixing system.

Can we paint or tile Aerocon Panels?

Yes. Suitable finishes include paint, wallpaper, putty or recommended finishing compounds, and tiles using compatible adhesives. Surface preparation should follow manufacturer recommendations.

Can Aerocon Panels be installed without plastering?

Factory-made panels can reduce the need for conventional thick plastering. Joint treatment, surface preparation and the required final finish must still be completed.

How quickly can Aerocon Panels be installed?

Panels can significantly simplify wall installation compared with conventional brick masonry. The actual time depends on total area, panel thickness and height, site access, number of installers, door and window openings, electrical and plumbing arrangements, and jointing and finishing. We can give you a project-specific estimate.

Can Aerocon Panels be removed and reinstalled somewhere else?

In certain situations, panel partitions can be dismantled. Reuse depends on the original fixing method, panel condition, jointing material, any damage during removal and the availability of suitable accessories, so we confirm it after inspecting the installation.

Planning a faster wall construction project?

Share your drawings, location and approximate wall area for guidance and a quotation. Mirra BuildTech Solutions supplies Birla Aerocon Wall Panels to builders, architects, contractors and homeowners, with guidance on thickness and applications, site measurement and quantity estimation, and installation planning and coordination, for new construction and renovation.